• The 30 feet would address a small club
• The 50 feet would address a large club
• The 70 feet might address a small hall
• The 90 feet might address an outdoor event
Using the Crown calculation, the results provides the power requirement for each of conditions. For each distance the dB level requirement was selected to be 90 dBs. In my case, I have a 300 watt RMS amplifier that I used in my application and will use this value as a reference for the explanation that I am trying to provide. Since I have the amplifier, my speaker rating should be in the range of 150 watt RMS / 300 watt program power.
Now the question is, what will be my minimum speaker sensitivity for each of these requirements.
• For the 30 feet for a small club, I would select one that is greater than 88 dB.
• For the 50 feet for a small club, I would select one that is greater than 93 dB.
• For the 70 feet for a small club, I would select one that is greater than 96 dB.
• For the 90 feet for a small club, I would select one that is greater than 98 dB.
Note: For every 3 dB increase in sensitivity the power requirement is decreased by 50%.
Notice that the greater the speaker sensitivity the less power that is required. So it would be in your best interest to select one that is as large as possible to provide the additional headroom for your application.
This is only addressing the typical bass reflux speaker that manufactures have most of their focus on. In my case, my focus is concentrating on the loading of the speaker as well. Last year I build a couple of folded horn subwoofers and the sensitivity of these cabinet increased by 8 to 10 dBs.
I loaded these cabinets with a speaker that was rated at sensitivity 90 dBs and the result of cabinet loading increased this speaker application up to 98 to100 dBs. The end result decreased my power requirement 2 to 3 times. To explain further, this 90 dB speaker could provide a 50 foot application but would require 487 watts to do this. Now with the loading of these subwoofers with this same speaker, I can provide a 90 foot application and would only require 158 at 100 dB to 250 at 98 dB.
Lloyd Perkins – PerkAudio – Live Sound Consulting & Custom Speaker Design.